Introduction For many purposes, it is been a while since I wanted to have a NAT64 gateway inside my LAN. Sadly, at the time of this writing, my home router does not propose that kind of service. So why not trying to run it on a Raspberry Pi ? NAT64 gateway is mainly used to reach IPv4 network from IPv6 network. There are many possible applications, such as opening an IPv6 access to a server farm that was only designed to operate through IPv4, or giving an access to IPv4 Internet for hosts only having an IPv6 configuration. This article describes how to configure a Raspberry Pi as a working NAT64 gateway with the help of the Tayga software.